DIN EN ISO 4287-2010 产品几何量技术规范.表面构造:剖面法.术语,定义及表面构造参数(ISO4287:1997+勘误表1:1998+勘误表2:2005+修改件1:2009);德文版本ENISO4287:1998+AC:2008+A1:2009

上一篇: ISO 7010 AMD 6-2010 图形符号.安全色和安全标志.工作场所和公共区域安全标志.修改件6
下一篇: ISO/IEC 14662-2010 信息技术.开放EDI参考模型

Product Code:SAE J1474
Title:Heavy-Duty Nonmetallic Engine Cooling Fans--Material, Manufacturing, and Test Considerations
Issuing Committee:Cooling Systems Standards Committee
Scope: The following topics are included in this report:Section 2驴ReferencesSection 3驴DefinitionsSection 4驴Material SelectionSection 5驴Production ConsiderationsSection 6驴Initial Structural IntegritySection 7驴In-Vehicle TestingSection 8驴Laboratory TestingThe Material Selection section lists environmental factors and material properties which should be considered when determining appropriate fan material(s) for a given application.The Production Considerations section covers various aspects of machine selection, mold design, and process control.The Initial Structural Integrity section lists factors which should be considered in addition to those covered by Section 3 of SAE J1390.The In-Vehicle Testing section lists factors which should be considered in addition to those covered by Section 4 of SAE J1390.The Laboratory Testing section addresses some test considerations and methods for nonmetallic fans which differ from those used with metallic fans or which were not included in Section 5 of SAE J1390.PurposeThis report exists to identify general methodology which addresses the areas of evaluation listed previously for injection-molded nylon fans. It is envisioned that those working with other processes and/or materials can use SAE J1390 and this document as starting points in the development of structural analysis methodology pertinent to their particular combination(s).
Rationale: The following topics are included in this report:Section 2驴ReferencesSection 3驴DefinitionsSection 4驴Material SelectionSection 5驴Production ConsiderationsSection 6驴Initial Structural IntegritySection 7驴In-Vehicle TestingSection 8驴Laboratory TestingThe Material Selection section lists environmental factors and material properties which should be considered when determining appropriate fan material(s) for a given application.The Production Considerations section covers various aspects of machine selection, mold design, and process control.The Initial Structural Integrity section lists factors which should be considered in addition to those covered by Section 3 of SAE J1390.The In-Vehicle Testing section lists factors which should be considered in addition to those covered by Section 4 of SAE J1390.The Laboratory Testing section addresses some test considerations and methods for nonmetallic fans which differ from those used with metallic fans or which were not included in Section 5 of SAE J1390.PurposeThis report exists to identify general methodology which addresses the areas of evaluation listed previously for injection-molded nylon fans. It is envisioned that those working with other processes and/or materials can use SAE J1390 and this document as starting points in the development of structural analysis methodology pertinent to their particular combination(s).

标准名称：	跨栏架
英文名称：	Hurdle
中标分类：	轻工、文化与生活用品 >> 文教、体育、娱乐用品 >> 体育设施及器械
ICS分类：	家用和商用设备、文娱、体育 >> 运动设备和设施 >> 运动设施
发布部门：	中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期：	2008-12-30
实施日期：	2009-09-01
首发日期：	2008-12-30
作废日期：
主管部门：	中国轻工业联合会
提出单位：	中国轻工业联合会
归口单位：	全国文体用品标准化中心
起草单位：	北京飞鹿体育用品有限公司、江苏金陵体育器材股份有限公司等
起草人：	肖建京、李春荣、罗文辉、曹振瑞、黎炎生、张洪印、岳峰、陆立青
出版社：	中国标准出版社
出版日期：	2009-09-01
页数：	8页
计划单号：	20072999-T-607

本标准规定了跨栏架的分类、要求、试验方法、检验规则及标志、包装、运输、贮存。
本标准适用于比赛用跨栏架和练习用跨栏架。

没有内容

没有内容

下列文件中的条款通过在本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
GB/T191 包装储运图示标志(GB/T191-2008,ISO780:1997,MOD)
GB/T2828.1-2003 计数抽样检验程序 第1部分:按接收质量限(AQL)检索的逐批检验抽样计划(ISO2859-1:1999,IDT)
GB/T2829-2002 周期检验计数抽样程序及表(适用于对过程稳定性的检验)
QB/T3826-1999 轻工产品金属镀层和化学处理层的耐腐蚀试验方法 中性盐雾试验(NSS)法
QB/T3832-1999 轻工产品金属镀层腐蚀试验结果的评价